Libiphone libiphone

Comments and changes to this ticket

• 

  Martin S. August 13th, 2009 @ 07:17 PM

  • Assigned user set to “Martin S.”
  • Tag set to “ifuse, libiphone, opensuse, usb”
  • State changed from “new” to “open”

  You are perfectly fine to post here.

  In order to get more verbose output you can do those steps:

  • Run usbmuxd with verbose output using "sudo usbmuxd -f -v -v -v -v -v"
  • Then run ifuse with debug output using "/sbin/mount.fuse.ifuse --debug -d whatever /mnt/"

  Also please post your lsusb output when the device which apparently is not working is attached to the computer.

• You flagged this item as spam.
  

  lazx August 14th, 2009 @ 08:25 PM

  Thanks Martin. Have attached the output of mount, usbmuxd, and lsusb.

  • mount.fuse.ifuse_output 1.3 KB
  • usbmuxd_output 9.4 KB
  • lsusb_output 14 KB
• 

  Martin S. August 16th, 2009 @ 02:18 PM

  You should not use packages from different distro versions. Unfortunately, the packages for factory do not build as factory is somehow really busy right now.

  Some notes:

  • The last usb configuration "PTP + Apple Mobile Device" seems missing from your lsusb output. Did you perhaps remove it or is it really not shown? Since lsusb says "bNumConfigurations = 3" it should be there.
  • "waiting for connection" is totally fine with iproxy. Use it like "iproxy 5000 22", then use "ssh root@localhost -p 5000" to connect to the iPhone using SSH.
  • We noticed that OS 3.0 devices actually have 4 usb configurations. Which firmware are you running on the device?

• You flagged this item as spam.
  

  lazx August 18th, 2009 @ 07:34 PM

  My firmware version is 2.2.1 (jailbroken).

  Thanks for the iproxy instructions. I can connect and navigate the phone! As for retrieving files, I am running into some problems. Using lftp, sftp protocol doesn't work - just a config file problem? Using fish (scp), transfers crawl at ~5B/s (don't work).

  iproxy output:

  Requesting connecion to device handle == 131074 (serial: removed), port 22 run_ctos_loop: fd = 4 run_stoc_loop: fd = 4 recv failed: Success send failed: Bad file descriptor waiting for connection accepted connection, fd = 4 Number of available devices == 1 Requesting connecion to device handle == 131074 (serial: removed), port 22 run_ctos_loop: fd = 4 run_stoc_loop: fd = 4

  ---

  Updated lsusb output attached. Thoughts? Should I upgrade to 3.0?

  Thanks for your help Martin

  • lsusb_output2 20.7 KB

• You flagged this item as spam.
  

  lazx August 18th, 2009 @ 07:48 PM

  Wow - won't post inline again haha. Mind deleting the above comment - I'll repost (with output as attachments).

  Thanks

• You flagged this item as spam.
  

  lazx August 21st, 2009 @ 09:55 PM

  Upgraded usbmuxd to "latest" git (~20090821) - and was able to successfully download all my files off of my 3G using the usbmuxd <-> iproxy <-> ssh method you described above.

  Used lftp's sftp mirror function, with the option "set sftp:connect-program rsh". ~1.0Mb/s down for smaller files. ~1.3Mb/s down for a 200mb file.

  Resolved?

• 

  Martin S. September 7th, 2009 @ 09:56 AM

  Does your iPhone 3G now mount with the latest usbmuxd you tried?

  We haven introduced a new and improved usbmuxd and the whole libiphone components chain is a bit out of sync API-wise.
  I'll come back to this once we have a stable chain again to test on the latest versions. Packages will be provided then.

• 

  Matt Colyer September 12th, 2009 @ 05:26 PM

  This one sounds like its resolved? If not, Martin 1.0 or 1.2?

• 

  Martin S. September 14th, 2009 @ 02:05 PM

  • State changed from “open” to “resolved”

  I think we'll close this for now, please retry once we push out new packages of the whole stack.