Lighthouse has a new layout. Prefer the old one? Return to the old layout, and switch back any time from the link at the top of each page.

Activity (RSS)

Thursday, May 21 2009
5 Integrate usbmuxd (when it's ready) was updated
  • Nikias Bassen
    Nikias Bassen commented at 8:31 PM

    I added a parameter -p to prevent usbmuxd from dropping the privileges. This is a workaround, if you want to use this for your system you need to add -p to the ...
Wednesday, May 20 2009
5 Integrate usbmuxd (when it's ready) was updated
  • Matt Colyer
    Matt Colyer commented at 3:47 PM

    Found it, the reason it fails is that you need root privileges to access the usb device on my system. However usbmuxd is dropping the permissions before it atte...
  • Matt Colyer
    Matt Colyer commented at 3:17 PM

    So I now have it running but it can't seem to find my iPhone's UUID (and none of the rest of the stuff seems to work without it). It looks like it is timing out...
45 SELinux Type-Enforcement Rules was created
  • Michael Ansel
    Michael Ansel created the ticket at 2:24 PM

    libiphone/iFuse don't currently have SELinux rules included. Here is a basic set to start with, although they should probably be tightened up a bit:
    * only perm...
Tuesday, May 19 2009
5 Integrate usbmuxd (when it's ready) was updated
  • Nikias Bassen
    Nikias Bassen commented at 2:49 PM

    The change is correct! I forgot to commit it, just noticed this either.

    BTW, I have just updated usbmuxd so multiple devices are handled correctly by udev. usbm...
  • Matt Colyer
    Matt Colyer commented at 2:39 PM

    Okay I added in that patch as well (and closed #39). The updated usbmuxd repository resolved my issues.

    I had to make a minor change to the python wrapper. Can ...
  • Nikias Bassen
    Nikias Bassen commented at 12:04 PM

    Forgot to mention something: the udev rules file from usbmuxd is launching usbmuxd automatically when a device is plugged in. So if your system is using udev an...
  • Nikias Bassen
    Nikias Bassen commented at 11:20 AM

    Hi again. I had to comment out the device selection by usb bus and device number in iphoneinfo and iphonesyslog due to the API change introduced by the previous...
  • Nikias Bassen
    Nikias Bassen commented at 5:35 AM

    Fixed. Forget to git push and the m4 issue has been resolved, too.
1 earlier change…
  • Matt Colyer
    Matt Colyer commented at 2:03 AM

    Two things.

    • ./autogen.sh fails on a fresh checkout of libusbmux (needs an m4 directory).
    • Also there wasn't a pkg-config in libusbmux which the above patch depe...
Updated method python binding to new ... was committed by Matt Colyer at 2:38 PM
Adapted iphoneinfo and iphonesyslog t... was committed by Nikias Bassen at 2:38 PM
39 properly detect gnutls errors was updated
  • Matt Colyer
    • State changed from open to resolved
    by Matt Colyer at 2:29 PM

    (from [34b8e4d575876ace41b91fb6e25a5fa9f9290608]) lockdown: Check for gnutls errors and silence compiler warnings. general: Removed some commented-out code.

    [#3...
  • Nikias Bassen
    • Milestone set to 1.0 Release
    by Nikias Bassen at 10:49 AM
  • Nikias Bassen
    • State changed from new to open
    by Nikias Bassen at 10:47 AM

    Here's a patch that makes lockdown check for gnutls errors and let it return IPHONE_E_SSL_ERROR. This should solve problems like the one described above.

    The pa...
lockdown: Check for gnutls errors and... was committed by Nikias Bassen at 2:29 PM
Updated README with requirement for u... was committed by Matt Colyer at 2:29 PM
Modified to make it work with latest ... was committed by Nikias Bassen at 2:04 AM
Make use of usbmuxd and remove libusb... was committed by Nikias Bassen at 2:04 AM
Monday, May 18 2009
5 Integrate usbmuxd (when it's ready) was updated
  • Nikias Bassen
    Nikias Bassen commented at 10:38 PM

    And here's a patch to make ifuse work with the above patch. It also closes the lockdown connection after AFC has been started, as this connection is not needed ...
  • Nikias Bassen
    Nikias Bassen commented at 10:36 PM

    Here's a patch for current libiphone to make use of usbmuxd. It removes usbmux.c and usbmux.h and does not link against libusb anymore.
    There's also an API chan...
Tuesday, May 12 2009
Fix some comments in mobilesync. http... was committed by Matt Colyer at 3:36 PM
Fix distcheck target for swig binding... was committed by Martin Szulecki at 3:34 AM
Fix 'make distcheck' mount.fuse.ifus... was committed by Todd Zullinger at 3:34 AM
Fixed autoconf and bump version numbe... was committed by Todd Zullinger at 3:34 AM
Call configure from autogen.sh This ... was committed by Todd Zullinger at 3:34 AM
Bump libiphone requirement to 0.9.0 r... was committed by Todd Zullinger at 3:34 AM
Update tarball version, create tar.bz... was committed by Todd Zullinger at 3:34 AM
Monday, May 11 2009
Revert the last patch as it breaks ra... was committed by Matt Colyer at 3:16 PM
Drop plist/ prefix from libplist incl... was committed by Todd Zullinger at 3:09 PM
Fix 'make distcheck' for python bindi... was committed by Todd Zullinger at 3:09 PM
Fixed autoconf typo Signed-off-by: M... was committed by Todd Zullinger at 3:09 PM
Made bz2 tarballs instead of gzip one... was committed by Todd Zullinger at 3:05 PM
1.2.0 Release was updated by Martin S. at 11:15 AM
 
1 of 75 tickets remain in this milestone
1.0 Release was updated by Martin S. at 11:14 AM
 
0 of 59 tickets remain in this milestone
Fixes for 0.9.1 release. http://githu... was committed by Matt Colyer at 2:42 AM
Fixed missing fdi file. http://github... was committed by Matt Colyer at 2:42 AM
Sunday, May 10 2009
Bump the version of libplist required... was committed by Matt Colyer at 6:49 PM
Added release command. http://github.... was committed by Matt Colyer at 4:32 PM
Remove unused libtools ac macro. http... was committed by Matt Colyer at 4:32 PM
Made a release command. http://github... was committed by Matt Colyer at 4:29 PM
27 [PATCH] NotificationProxy updated was updated
  • Matt Colyer
    • State changed from new to resolved
    by Matt Colyer at 3:35 PM

    (from [1351b686d450112ae55d26d81d9d59c5f542f12e]) NotificationProxy support added.

    [#27 state:resolved]

    Signed-off-by: Matt Colyer matt@colyer.name http://gith...
NotificationProxy support added. [#2... was committed by Nikias Bassen at 3:35 PM
The libtool macro is needed here. htt... was committed by Matt Colyer at 3:10 PM
Saturday, May 09 2009
27 [PATCH] NotificationProxy updated was updated
  • Matt Colyer
    Matt Colyer commented at 6:12 PM

    Should I merge this in now or wait for the usbmux stuff to land?
6 Implement one-way contact / calendar syncing was updated
  • Matt Colyer
    • State changed from open to resolved
    by Matt Colyer at 6:07 PM

    I agree with Jonathan, the additional API was added and there isn't anything to do here now. Feel free to open more tickets as things arise.
Fix dependencies in pkg-config file. ... was committed by Jonathan Beck at 6:05 PM
Remove unneeded libtool macro. Signe... was committed by Jonathan Beck at 6:05 PM
Add includedir to make swig locate pl... was committed by Martin Szulecki at 3:59 PM
5 Integrate usbmuxd (when it's ready) was updated
  • Nikias Bassen
    Nikias Bassen commented at 11:22 AM

    I totally agree. I'll see if I can make it work like this and then we should integrate it as soon as possible.